-
For the contractor who needs a little bit more capacity in their tank, the Pave-Mate PM400 is the perfect solution. Whether a trailer or a skid, this unit delivers top quality performance. Be sure to ask about our spray bars! Call us today to discuss your next emulsion sprayer. -
The Pave-Mate models PM060 and PM100 are the perfect companions for the contractor working on small jobs, such as filling potholes or minor trenching. These units come standard as a skid with built-in forklift pockets for ease of use and mobility. Put them in the back of your pickup and you’re set to go! Also available as a trailer. Call us today to discuss your next emulsion sprayer.530-674-8577
-
If you need more capacity for your tack pot, the Pave-Mate PM800 is the perfect solution. With a GVWR of 9,999 lb, no special driver’s license is needed to tow this unit and the 800 gallon capacity means fewer trips to refill. The Pave-Mate PM800 will hold enough oil for most large jobs. If you’re worried about leaving oil in your machine overnight, ask us about our night heaters! Call us today to discuss your next emulsion sprayer.530-674-8577
-
The POL allows you to connect your propane source up to a regulator. With ¼” NPT it fits most regulators. -
This propane regulator is meant to regulate the burner on your Diamond Bilt Tack Pot. It has a range of 0-35 PSI and takes ¼” NPT fittings. Check out our POL Adapter and Pressure Gauge. -
This propane regulator is meant to regulate the hand torch on your Diamond Bilt Tack Pot. It has a range of 50-135 PSI and takes ¼” NPT fittings. Check out our POL Adapter and Pressure Gauge.
-
Whether burning weeds or drying out potholes, our torch is perfect for you. With a capacity of up to 750,000 BTU, this torch will get the job done. -
Pulley with ¾” Bore and 7.95” outside diameter. -
Meant to be paired with our load sense systems, this pulse width modulator allows the user to control water pump speed with the turn of a knob. -
1/8” NPT 0-300 PSI Max Inlet 0-125 Max Outlet 20 SCFM -
When used with the appropriate thermocouple, the safety shutoff valve ensures that the propane will stop flowing if there is no flame in the burner and make sure that propane continues to flow if the burner is lit. -
Diamond Bilt’s SCM300 is a rugged, 300 gallon, self-propelled slurry buggy. Like all of our products, it is built to last. With a heavy duty 3/16” tank and extra durable rubber squeegees, this rig will last for years to come. Call us today to discuss your next seal coating machine.530-674-8577
-
Diamond Bilt’s slurry tanks range from 200 to 8,000 gallons. With hydraulically driven agitation and an optional materials pump, these tanks are the perfect storage or transportation option for any size operation. Call us today to discuss your next slurry tank.530-674-8577
-
Built with ease of use and safety in mind, the Diamond Bilt sparker box is an automatic burner ignitor meant to be powered by a 12V DC battery. With just the push of a button, you generate the spark needed to light your propane burner. -
The Diamond Bilt spray wand is designed with the end user in mind. It is lightweight with a stay-cool handle and no drip tip. -
Our durable spray wand hoses are perfect for liquid asphalt. Although our standard sizes are 25’ and 50’, custom lengths are available up to 100’. Call today to explore your options! -
Our Spray Wand Nozzles are ¼” NPT and offer an 80° spray pattern. These nozzles are meant to fit in our Spray Wands or our Spray Bars, but can be used for other applications. Call us to inquire about bulk discounts! -
The Diamond Bilt spray wand valve opens and closes the spray wand and is designed to work specifically with Diamond Bilt spray wands. -
Our stainless steel butterfly valves come in 3” and 4” capable of handling pressures of 50 PSI. If you need a valve to handle higher pressure, call and ask about the 150 PSI butterfly valves. Call for rebuild parts. -
Diamond Bilt’s Fan Spray is a high quality and durable stainless steel spray valve accessory. It has an adjustable spray pattern and with a 2 ½” grooved fitting, it fits most water valves. -
Designed to be utilized alongside our spring mounts, this stationary mount makes sure you tank is solidly attached to the rear of the truck frame. -
Available in Stainless Steel or Black Iron, these rubber pads are meant to absorb any impact from chassis flex while hauling a tank. -
Diamond Bilt’s heavy duty Telescopic Tank Mounts are made as a flexible attachment of a water tank to a chassis. Their design allows the chassis to twist and flex without damaging the tank. -
Meant to be used with Diamond Bilt tack pots, this thermocouple hooks up to the safety shutoff valve to ensure propane stops flowing if there is no flame and keeps it flowing while the burner is lit. -
V Belt meant to connect centrifugal clutch to pulley. -
Out of stock
4” Vented Waste Oil Cap with Tether for the waste side of your flush/recovery tank. 4” Vented Waste Oil Cap with Tether for the waste side of your flush/recovery tank. -
The Diamond Bilt Water Pressure Control Valve is a relief valve that can be put on any water truck. If you’re tired of ruining pumps when a driver shuts off valves without first slowing the pump, this is the product for you. Meant to be mounted to the top of your tank for easy access and repair, the WC250-5 relieves your system at a pressure level of your choosing. Buy the valve by itself or a complete install kit. Frequently paired with regulator and gauge, console. -
Our water pumping kits are customized to fit your application. Call us and we will walk you through the process of selecting the right pump for the volume and pressure you need and we will make sure you have the right system to drive the pump, whether it be hydraulic or engine driven. Whether you’re looking for something to spray water or to transfer potable water with a food grade system, we have something that will work for you. Call today to find the right water pumping system for you.
530-674-8577
-
If you’re looking for a tank to mount on a truck yourself, Diamond Bilt is a perfect match. We feature 4 different profiles and make tanks sizes from 1,000 to 5,000 gallons. Our tanks are either stainless steel or black iron, made with 7 Gauge heads and wrappers. We also make tanks for specialized uses, such as potable water or Cal Fire compliant. Call us today and we will build a tank to your specifications.
530-674-8577
